RHEOSTATS

Rheostats are made with a variety of resistance & current carrying capacity so as to satisfy every need.
Ohms : Available from min 4 Ohms to max 13000 Ohms
Amps : Available from 0.3 amps to 15 amps

SPECIAL FEATURE :

Supports : These are of cast metal or bakelite.  A slit is provided at the base to mount it on board or table, Tubes : Tube are made of special porclene.,Terminals :  Bakelite or Metal Terminals are provided. Two terminals are provided for external leads and one on sliding rod.,Winding Wires : The wires are of Eureka and are perfectly oxidized.,
Sliders : The sliders are provided with phosphor bronze or carbon graphite3 contacts.  These have double contact system and move smoothly on the sliding rod.
Discription : Total resistance and maximum current capacity is marked on the slider.,
Accuracy :  The actual resistance of Rheostat shall be +20%,-5% of the rated resistance as per our resistance chart. (as per ISI specification no. IS : 9051 S.No. 10.3).
Current : Permanent current loading should not exceed 75% of the marked values.

Resistance box
Superior quality  Heavy Brass metal blocks size 1/2" are bound to bakelite plate by means of nuts and screws securing rigid fixation and eliminating any chance of contact error creping due to loosening of plugs and lugs which are cut to fine taper and are interchangeable. Plugs heads are machine moulded , of heavy insulated bakelite in beautiful shapes.  the boxes are made to Teak-wood and nicely polished.

Great care is taken in preparing the wire wound resistance.  Selected Double Covered Eureka Wire is wound in bakelite  spools.  Sufficient ageing and Heat Treatment is processed througt to avoid any moisture effects.  Solder Joints are sealed after calibration.  All Resistors are calibrated on imported Testing Bright W.G. Pye & Co. Cambridge, England. Accuracy +- 0.1 %

Post Office Box Plug Type
Having three or four pairs of ratio coils of (10,100,1000 ohms ) and 16 series coils of selected double covered wire enclosed in a teakwood case with Sunmica Top. The blocks are made of brass size 1/2" (Square Rod) nicely golden lacquered and resistance values are engraved on them. The top is manufactured from Bakelite. Two tapping keys are provided for Battery and Galvanometer. All plugs are interchangeable.  All coils are calibrated on imported Testing Bridge W.G. Pye & Co. Cambridge, England. Accuracy +- 0.1%.

(a) P.O.Box 3 Ratio : Resistance 1-5000 ohms.
                              (Ratio 10,100,1000 ohms.)
     
(b) P.O.Box 4 Ratio : Resistance 1-5000 ohms.
                              (Ratio 1,10,100,1000 ohms