Aspirator Bottles î
Aspirator Bottles are made of Polypropylene and are therefore much lighter than glass. These are autoclavable durable and dependable. The leak proof spigot screwed to the bottle body requires only a half turn to open or close. These bottles are used for storing or dispensing distilled water and other laboratory solutions.

Automatic Model Sets î
These sets consist of moulded balls of different colors and sizes along with lugs of different sizes. These sets are very helpful in modeling different organic & inorganic compounds.
SENIOR SET: This set consists of 150 lugs & 370 balls of prescribed colors  & sizes packed in a moulded box having separate space for every particular color & size of ball
JUNIOR SET: This set consists of 30 connecting lugs & 75 balls of different colors & sizes.

Beakers î
Beakers, moulded in Polypropylene, have excellent clarity and very good chemical resistance. The autoclavable beakers have prominently raised graduations on the outer surface. Pouring a solution becomes very convenient because of its tapered spout. Beakers are available in capacity 50,100,250,500,1000 & 2000 ML.

Buckner Funnel î
Moulded in Polypropylene, these two piece funnels are light weight, easy to clean & autoclavable. The top portion can be snap fitted with the lower one forming a vacuum seal which does not require greasing. The base of the top portion has a perforated filter plate. Buckner Funnel is available in Size 70 & 100 MM

Centrifuge Tubes î
Moulded in Polypropylene, these tubes are clear, strong & safe. These autoclavable tubes are provided with printed graduations on the outer surfaces. The built in seal ring in the cap makes these tubes absolutely leak proof. These tubes can withstand forces upto 7500xG & 12000xG for 15ml. tubes respectively. These tubes are available sterilized as well as non-sterilized. The Centrifuge Tubes are available in 15 & 50 ML.

Centrifuge Tubes with round bottom î
Centrifuge Tubes with round bottom are moulded in Polypropylene & Polycarbonate. These tubes have excellent clarity and are strong enough to be used upto 50,000xG. These tubes can be autoclaved, however, repeated autoclaving in PC tubes reduces their mechanical strength. Available in 15 & 50 ML. capacity

Conical Flasks î
Made of Polypropylene, these cone shaped flasks are rigid, translucent & autoclavable. The screw cap keeps the contents of the flask contamination free and makes the flask leak proof. Threads should be disengaged before autoclaving. Conical Flask is available in capacity 100 , 250 & 500 ML.

Conical Measures î
These Conical Measures are very good for measuring small quantities of reagents. Moulded in Polypropylene, these autoclavable measures have a hexagonal base which provides it excellent stability. The Measures are clear have good chemical resistance and have raised graduations for easy reading. Available in capacity 12,25,50,125 & 200 ML.

Coplin Jar î
This jar is made of Polypropylene can hold 10 slides of the size 1"x3" back to back. The interior of the Coplin Jar is grooved in a way to hold slides in erect position. Domed & shallow thread screw cap provides protection to the slides.

Crystal Model Sets î
These Crystal Model Sets contain different colored jacks (Red, Black & White) & connectors (long & short) in a prescribed number to be joined together in an illustrated way to form structures like Diamond, Graphite & Sodium Chloride.

Pain Desiccator î
Pain Desiccators are physically the same as Vaccum Desiccator. Only difference is the absence of stop cock. Grease should be applied on the flanges to make it air tight.

Dessicators Vacuum Type î
Dessicators are made of Polypropylene and Polycarbonate. The autoclave vaccum desiccators can hold vaccum upto 740mm of Hg for 24hrs. without any greasing. The top dome, moulded in rigid and transparent Polycarbonate, gives a crystal clear view of the desiccant placed inside. The Knurled knob on the top provides easy handling of the dome. The lower part is made of Polyproptlene. An internal groove is provided on the flange to hold a silicon rubber O-Ring.

Dropping Bottle î
Blown in Low Density Polyethylene, this bottles dispense small uniform drops of liquids when pressed lightly. Available in capacity 60 & 125 ML.

Fisher Clamp î
These Clamps are moulded in Polypropylene making it completely corrosion-proof. The spring loaded jack in the middle provides a vice like grip to the Burette and prevents it from slipping. Two tapered wedges are provided to ensure firm grip on rods having dia 1/2" or 3/8".

Funnel î
These long stem funnels have smooth walls, 60 cone angle and external ribs to prevent air lock. Moulded in Polypropylene, these clear funnels can also be steam autoclaved. In 50,62,75,100 & 150 mm

Immunology Plates î
ELISA/ASSAY plates are made of optically clear, non-toxic Polystrene. These plates with 96U bottom or flat bottom wells bear alpha numeric index. Uniform placement of all the well facilitate use of multi channel pipettes. These plates packed individually are available non-sterile as well as radiation sterilized.

Kipps Appratus î
This apparatus is made of polyethylene has three main portions. The top portions is fitted witha thistle funnel and a bulb structure through which dilute acid can be poured wich reacts with a metal sulphide in the base of the Apparatus. HS gas then evolved collects in the middle dome from where it can be released through a leakproof stopcock fitted with a self lubricating PTFE plug. The base is provided with a residual outlet fitted with a cap for easy cleaning. In Size :  250,500 & 1000 mm

Laboratory Tray î
This tray is moulded in polypropylene is a multipurpose tray that can be used for sterilizing, drying glassware, porcelainware and other laboratory instruments. These steam autoclavable trays have tapered walls which prove good for nesting.  Available in Siz : I75 X 300 X 75 MM &  450X 350 X 75 MM

Measuring Cylinders î
Measuring Cylinders, moulded in Polypropylene, are single piece cylinder. These autoclavable cylinders have raised prominent graduations for easy reading and have excellent contact clarity. The broad base provides good stability.
Available in capacity : 10 , 25,50,100,250,500,1000,2000 ML.

Measuring Jugs î
These handy jugs, moulded in Polypropylene, are clear, autoclavable and have good chemical resistance. These jugs are provided with a handle for easy & convenient lifting and have raised graduations for easy reading. Measuring Jugs are  available in 250,500,1000,2000 ML.

Micro Centrifuge Tubes î
These Micro Centrifuge Tubes, moulded in Polypropylene, have build in plugs which snap fit and make these tubes leakproof. These tubes can withstand high forces of an ultra centrifuge and can be used for transmitting samples for micro analysis.for 0.5 & 1.5 ML.

Micro Tip Box î
These unique boxes are moulded in Polypropylene and are therefore autoclavable. The box itself is clear providing an excellent view of the tips inside while a table like structure is provided inside to hold the tips. The tip holding spaces are uniformly placed to facilitate the use of multichannel pipettes. The cover is joined to the base through ball catcher hinges and provides excellent protection to the tips.
For 96 Micro Tips of 2-200Ul , For 100 Micro Tips of 200-1000ul

Petri Dish î
These Petri Dishes moulded in Polypropylene are clear & unbreakable. The moulding material being Polypropylene, these can be repeatedly autoclaved. The ridges on the inner side of the cap prevent the base from sticking to the cap. Available in size 50,75,100,125 & 150 MM

Pipette Pump î
This is a fast release pipetting device for precise pipetting & zip quick emptying. The Knurled thumbwheel can be rotated to draw up or dispense liquids while the releaser may be pushed in for zip-quick emptying. The moulded chuck has a silicon rubber collect inside to hold various pipettes of standard sizes. It resists acids & alkalies and can be easily disassembled for thorough cleaning.  For 2, 10 & 25 ML.

Pipette Stand (Rotatory) î
Moulded in Polypropylene, this unique stand holds a maximum of 94 pipettes and rotates on a central vertical axis for convenient selection of any particular pipette. The lower rotating disc has four concentric troughs with tapered sides and open bottoms which cardle the pipette tips protectively and permit water drops to run off. The upper disc has a grid pattern concentric with the bottom disc and keeps the pipettes vertical. Liquids draining off the pipettes are retained on the top of the stationary base by the outer ring. This stand can be easily disassembled & reassembled.

Pipette Stand (Vertical) î
This is a stable, non-corrosive, detachable stand which can hold 28 pipettes with maximum dia 14 mm. The heavy base measures 225 mm in diameter and a Polypropylene coated square rod measuring 375 mm in length is screwed into the base. The top disc that can be fixed on the rod has holes for holding pipettes while the lower one has pilot holes where the pipette tips rest and liquids drain down to the base. These discs can be adjusted on the rod according to the length of the pipette. The arrows provided on the discs should be kept parallel to ensure that corresponding holes are being centered.

Rack for Micro Centrifuge Tubes î
Moulded in Polycarbonate, this autoclavable rack is made for holding twenty four 1.5 ml. micro centrifuge tubes. This rack has a unique stacking feature which prevents movement in any direction. The holes are numbered & lettered for easy identification. For 24 & 48 Tubes.

Rack For Petri Dishes î
These transparent, ready to use, disposable Petri Dishes are made of optically clear, non-toxic, Polystyrene. These Petri Dishes packed individually in polythylene bags are sterilized by radiation/E.T.O. For 90 , 60 & 35 MM Petri Dishes.

Reagent Bottles î
These narrow mouth Reagent Bottles are available in Polypropylene as well as Polyethylene. The PP bottles are rigid, translucent and have excellent contact clarity. These bottles can be autoclaved filled as well an empty. On the other hand, the Polyethylene bottles too have excellent strenght and are unbreakable. The Polypropylene Cap has a built in seal ring to make these bottles leakproof .Available in Capacity 60,125,250,500 & 1000 ML.

Reagent Bottles (Wide Mouth)  î
These wide mouth Reagent Bottles are available in Polypropylene as well as Polyethylene. The PP bottles are rigid, translucent and have excellent contact clarity. These bottles can be autoclaved filled as well as empty. On the other hand, the Polyethylene bottles too have excellent strength and are unbreakable. The Polypropylene Cap has a built in seal ring to make these bottles leakproof.The Bottles are available in capacities 60,125,250,500 & 1000 ML.

Retort Stand î
These non-corrosive, moulded Retort Stands provide excellent replacement for the metal ones. Even the metallic rod has a polypropylene covering making it non-corrosive. The rod measuring 12.5mm x 750mm can be screwed into the heavy base giving way to a perfectly stable Retort Stand.

Sample Containers î
Sample Containers are made of Polypropylene. These thin walled, disposable containers are easily screw capped with less than 1/4" of a rotation. As one screw caps the container, the top of it sets in a domed ring in the cap making it completely leak proof. This is perhaps the ideal most option available for carrying samples from one place to another safe & sound

Scintillation Vial î
These unbreakable vials, moulded in Polyethylene, are fitted with leakproof screw caps. These vials can be used with standard counting equipment for liquid scintillation system and are excellent for low activity count.

Separating Funnel î
These Funnel is made of Polypropylene, giving excellent contact clarity and strength. The pear shaped, autoclavable separating funnel has a leakproof threaded screw cap. The Polypropylene stopcock, fitted with a self lubricating PTFE plug, is push fitted to the stem of the seperatory funnel.   Separating Funnels are available in 100,250 & 500 ML.

Slide Box î
These Slide Boxes are durable, compact & provide utmost protection to 1"x3" slides. Heavy walls will not warp, splinter or crack. Boxes are unaffected by humidity and are thoroughly insect proof. Base of the slide box has a numbered index for easy slide identification. for 25,50 & 100 Slides

Slide Mailer î
Slide Mailer present the best option to carry prepared slides from one place to another. Moulded in Polypropylene, these Slide Mailers are available in two sizes i.e. 2 slides & 5 slides. For 2 & 5 Slides

Spatula î
Moulded in Polypropylene, Spatula consists of a spoon on one side while the other end is a flat construction with a knife edge. This edge is helpful in breaking up crystals of different salts while the spoon is used to draw salts from the containers

Stop Cocks î
These polypropylene Stop Cocks are fitted with a PTFE plug & have serrated tubulations that accept from 6mm to 10mm tubing. These Stop Cocks are absolutely leakproof and are available in two different options  2 way & 3 way.

Storage Boxes î
These Storage Boxes, made of Polypropylene, prove to be an excellent option for storage of different powdered reagents & other material in the laboratory. Square shape of these boxes help in saving shelf space. Available in three different sizes, these boxes have polypropylene caps, are autoclavable, provide good chemical resistance & heavy duty service. Available in 250,500 & 1000 ML.

Syphons î
These self priming Syphons can be sued for pouring liquids from large containers to small ones without actually lifting them. Insert the open end of the tube in the liquid, close the stop cock and pump the bulb. As soon as the liquid enters the bulb, flow is automatically regulated. Stop pumping further. Liquids can now be dispensed by opening the stopcock

Test Tube Basket î
Test Tube Baskets are made of Polypropylene. These autoclavable, unbreakable and non-corrosive baskets are ideal for rinsing & draining glassware. These are also useful for storage of test tubes or culture tubes during sterilization or incubation.

Test Tube Caps î
This transparent polypropylene cap for Test Tubes proves to be an excellent protection to the contents to the tubes. The grooves inside the cap tighten the fitting on the tube while the outer grooves would hold identification labels. The built in seal ring would set in the tube making the combination a leakproof one. .25 MM

Test Tube Stand î
These ingenious racks with a 3-tier design provide clear view of the tube contents & convenient insertion & removal of tubes. The PC rack has transparent upper & middle plates where as in PP racks, every part is coloured & opaque. These autoclavable racks can withstand sub-freezing temperatures.

Test Tube Stand Round î
A handy, little, space saver, this circular twelve place Polypropylene Test Tube Stand has four 25 mm dia holes & eight 19 mm dia holes in its top plate. The base has matching hemispherical wells & 16 vertical pins for drying tubes surrounded by a trough to catch drippings. This autoclavable rack can be easily disassembled for cleaning purpose. 19 mm. & 25 mm. Tubes

Volumetric Flask î
Volumetric Flasks, blown in Polypropylene, are strong, unbreakable and have good contact clarity. These autoclavable flasks are provided with screw caps to prevent leakage. Available in capacity 25,50,100,250 & 500 ML.

Wash Bottles î
Wash Bottles are made of Low Density Polyethylene which gives these bottles a translucent and unbreakable character. Solutions can be poured easily by squeezing the bottle lightly. The cap is fitted with a flexible polyethylene delivery tube which can be aimed whereever required . Available in capacity 125,250,500 & 1000 ML.

Wash Bottle New Type î
These Bottles are also made of Low Density Polyethylene are are therefore translucent and unbreakable. The distinguishing feature that these bottles contain is the built in delivery tube making it a one-piece Wash Bottle. These Bottles are graduated on the outer surface to give an approximate idea about the volume of solution filled or dispensed

Available in capacity 125 , 250 , 500 & 1000 ML.